- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
新-高温电阻率测试仪
-
高温绝缘电阻率测试仪
-
石墨电极电阻率测试仪
-
210-炭块电阻率测试仪
-
121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121A-绝缘电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:点对点对地电组率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:油介质损耗电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121A1-热刺激电流测...
-
落球回弹试验仪,介电击穿强度测定仪:121B-全自动电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:高低温绝缘电阻率测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121-体积表面电阻率测...
-
新-高温电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
海绵压缩变形试验箱
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验机
-
海绵落球回弹试验仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压陷硬度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩蠕变测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵空气透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵往复冲击疲劳试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫缓冲能量试验机
-
2000-海绵拉伸撕裂试...
-
1000-海绵拉伸撕裂试...
-
慢回弹泡沫复原时间测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高相电压小感应电流测试仪(耐弧光测试仪)-(来计算机所抑制)
High voltage low current tester (arc resistance tester) - (computer control)
护肤商品名稱称:耐电弧试验机
Product name: electric arc resistance tester
服务应用:NDH-A
Product model: NDH - A
够满足标:GB/T 1411-2002《物质隔热的材料耐高低平直流电电弧尖端放电尖端放电的检验》(就是指IEC 61621-1997)及ASTM D495等规定的必须来设计开发的,并适合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
其主要用于空间及功能模块:
本疲劳实验机是依据APP于电机的、设备和家庭用的设备等制造业的电工维修用塑胶、树酯建材胶和接地漆等接地建材的耐电孤特点鉴定,主于液体接地建材如:塑胶、pet薄膜、树酯建材、黑云母、瓷砖、玻离、接地油、接地漆、厚纸板等物质的耐电孤特点测式;
本检测机由操作系统把控作业,不错表明现行调查英文壮态及调查英文時间,调查英文结束了后并存放现行调查英文数剧,并可打印机.标准检测数据。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 机器为左右一起的结构,底端为工作程序,上方为疲劳恒温恒湿试验箱。
2 本厂品的选择*新智力设定技巧,能够的选择软件程序(IEC或ASTM)可自行去可靠性试验,并在电脑主机上体现实验的过程 和后果。
3 **特性优良,抗干挠效率强,检测高精准度不高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电孤通断时候随机误差:大于 ±10ms
2 调压器电容量:2kVA
3 额定值耐压的电压:12.5kV
4 检测电流值误差:±3%
5 电压调节gps精度:±10% 直流电測量误差:1.5%
6 电极片对试板学习压力:(0.5±0.05)N
7 金属电极板材:钨棒
8 电极材料时间:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 操作环境摄氏度:(23±2)℃
10 利用条件干湿度:(50±5)%
11 电:220V±5% 50Hz
12 试验报告 具体方法: 国家行业标准/美标/10 mA 联续/20 mA 连续式/30 mA维持/40 mA间断性
13 做实验的时候程序流程方式:
| 程序流程图段 | 焊弧瞬时电流 mA | 脉冲通断日期s | 各小程序段不间断事件s | 校正总期限s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 连续式通 | 60 | 240 | |
| 5 | 20 | 间断性通 | 60 | 300 | |
| 6 | 30 | 重复通 | 60 | 360 | |
| 7 | 40 | 间断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 序列号 | 种类 | 人数 | 注 |
| 01 | 耐电孤检测仪仪 | 两台 | |
| 02 | 金属电极软件系统 | 每套 | |
| 03 | 参比电极网架支座 | 一种 | |
| 04 | 电源适配器电览 | 一整套 | |
| 05 | 接地线放** | 一支队伍 | |
| 06 | 电流大小毫安表 | 两台 | |
| 07 | 计算机测控手机软件 | 一种 | |
| 08 | 试件材料架 | 两支 | |
| 09 | 电极材料高度标准规范块 | 2块 | |
| 10 | 的视角准则块 | 2块 | |
| 11 | 淘瓷片 | 2片 | |
| 12 | 喷墨复印机机 | 1台 | 品牌标志 |
| 13 | 计算出来机 | 1台 | 国际品牌 |
| 14 | 动用情况产品说明 | 1份 | |
| 15 | 达标证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 产品的型号查询:
NDH-A 耐弧光可靠性试验仪-微机调控
NDH-B 耐电弧放电疲劳试验仪-接触屏设定
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!